Sony HDW-D1800 HDCAM studio editing recorder with Digital Betacam and MPEG IMX playback
Condition:
Demo
Availability:
Call For Availability
Warranty :
Manufacturer's Warranty
Price:$29,950.00
Order Today Ship Today, Order Before 4:30pm P/T To Order By Phone Please Call 415.221.6128 Need More Info or Can not Find Something?
Affordable HDCAM studio editing recorder with Digital Betacam and MPEG IMX formats legacy playback. Capable of Recording and playback HDCAM 1080/59.94i, 50i, 25PsF, 29.97PsF, 23.98PsF and 24PsF formats. 3-2 pull down is available by using option board HKDW-104. This deck inherited all editing functions from HDW-2000 series, such as DMC, audio split, pre-read and audio cross-fade editing. A color LCD panel on the control panel displays various type of information including audio level meter and time data. The LCD unit also displays video when playback or recording. Built-in down converter enables to output 480/59.94i or 576/50i. Also Up converter enables 1080/59.94i or 1080/50i HD output from Digital Betacam or MPEG IMX tape playback. Up to 3 packets of VANC metadata can be recorded and played back. Non-audio recording is available such as Dolby-E or AC3. By using HKDW-104 option board, 720/50P or 720/59.94P output is available. The HKDW-105 i.LINK (HDV) input option board can be installed to record the i.LINK (HDV) signals from HDV devices onto HDCAM tapes.
Highlights:
HDCAM recording and playback - 1080/59.94i, 50i, 25PsF, 29.97PsF, 23.98PsF and 24PsF
Legacy playback of Digital Betacam and MPEG IMX
Built-in down converter enables to output 480/59.94i or 576/50i from HD
Simple control panel with color LCD panel which can display audio level meter, time data and playback/recording picture
DMC, Pre-read, audio split and audio cross-fade editing
Up to 3 packets of VANC metadata recording and playback
Non-audio data such as Dolby-E or AC3 can be recorded
RS-422 connector is equipped for Sony 9pin remote control
Option HKDW-104 enables 3-2 pull down output or 720P conversion output
Option HKDW-105 enables to record HDV input via i.LINK onto HDCAM tape
Video remote controller HKDV-900 can be connected
Remote editing controller RM-280 can be connected
Features
Benefits:
HDCAM format
The HDCAM format uses the same 12.65-mm width tape as the conventional Betacam series. It provides high definition images, offering up to two hours of recording. High-quality 20bit/48kHz digital audio is supported in HDCAM format and there are four digital audio input/output channels.
Legacy playback
Digital Betacam or MPEG IMX recorded tapes can be played back and the VTR can output SD and HD signals at the same time by using SD to HD built-in up converter.
Control panel with LCD display
The control panel contains an LCD display unit to display various types of information including time data. The display mode can be changed to show the video which is currently recorded or played back.
Function menu
You can use the function buttons on the LCD display and the MULTI CONTROL knob to easily carry out many of the operations and make many of settings supported by the unit. The current settings can be checked on the LCD display.
DMC editing
This allows automatic editing with a varying playback speed memorized beforehand for an edit segment.
Pre-read editing
This allow you to playback pre-recorded video and audio material, edit it by applying effects with an external device, and then recorded in real time on the same tape.
Cross-fade editing
In audio editing, you can fade the audio track. You can select cut-in, fade-in, fade-out or cross-fade.
Built-in down converter
This unit has HD to SD down converter function and can output SD SDI and analog composite signals as well as HD SDI.
Remote control function
This unit can be controlled from an external remote controller or editor through an interface complying with RS-422A (Sony 9pin). Additionally a parallel (50pin) interface is also fitted as standard, supporting easy external control through the parallel interface.
3-2 pull down playback and 720P output function (optional)
The HKDW-104 option board can be installed in this unit to carry out 3-2 pull down playback and 720P output.
HDV (i.LINK) input (optional)
The HKDW-105 option board can be installed in this unit to record the i.LINK (HDV) signals from HDV devices onto HDCAM tapes.
A/D Quantization
20 bit/sample
Crosstalk
Less than -80 dB; (at 1 kHz between any two channels)
D/A Quantization
20 bit/sample
Distortion
Less than 0.05%, (at 1 kHz emphasis ON reference level)
Dynamic Range
More than 95 dB, (at 1 kHz emphasis ON)
Frequency Response
20 Hz to 20 kHz; +0.5 dB/-1.0 dB (0 dB at 1 kHz)
Bandwidth
Y: 0 to 5.75 MHz +0.5 dB/-2.0 dB; R-Y/B-Y: 0 to 2.75 MHz +0.5 dB/-2.0 dB
Differential Gain
2% or less
Differential Phase
2% or less
K factor (2T pulse)
1% or less
Output SCH Phase
Based upon RS-170A/CCIR R.624-3
S/N Ratio
53 dB or more
Y/C Delay
20 ns or less
Headroom
20 dB (18 dB selectable)
Quantization
20 bits/sample
Audio Sampling Frequency
48 kHz (synchronized with video)
Wow & flutter
Below measurable level
Channel Coding
S-I-NRZI PR-IV
Compression
Coefficient recording system
Error Correction
Reed-Solomon code
Quantization
10 bit/sample (compression: 8 bit/sample)
Sampling Frequency
Y: 74.25 MHz; R-Y/B-Y: 37.125 MHz
124 min (w/ BCT124HDL Caas)
59.94i, 29.97PsF
149 min (w/ BCT124HDL Cass)
50i, 25PsF
40 min (w/ BCT40HD Cass)
59.94i, 29.97PsF
48 min (w/ BCT40HD Cass)
50i, 25PsF
50 min (w/ BCT40HD Cass)
24PsF, 23.98PsF
Applications
Studio Recorder/Player
Dimensions (W x H x D)
16 7/8 x 6 7/8 x 21 1/2 inches (427 x 174 x 544 mm)
Fast Forward/Rewind Time
Approx. 3 min with BCT-D124L cassette
Format
HDCAM
Load/Unload Time
6 s or less (both L and S cassettes)
Operating Humidity
25 to 90%
Operating Temperature
41 to 104 degrees Fahrenheit (+5 to +40 degrees Celsius )
Power Consumption
150 W
Power Requirements
100 to 240 V, 50/60 Hz
Servo Lock Time
0.6 s or less (59.94i and 29.97PsF from standby on); 0.7 s or less (50i 25PsF 24PsF 23.98PsF from standby on)
Storage Temperature
-4 to +140 degrees Fahrenheit (-20 to +60 degrees Celsius )
Tape Format
HDCAM
Weight
48 lb 8 oz (22 kg)
Analog Audio Input
(CH1/2/3/4/CUE); XLR-3-pin type (female) x 5; Low off: -60 dBu high impedance balanced; High off: +4 dBu high impedance balanced; High on: -4 dBm 600 termination balanced
Analog Audio Monitor Output
XLR-3-pin type (male) x 2, +4 dBm at 600 load, Low Impedance, Balanced
Analog Audio Output
(CH1/2/3/4/CUE), XLR-3-pin type (male) x 5, +4 dBm (600 load), Low impedance, Balanced
Analog Composite Output
BNC x 3 (RS-170A including one character out and one WFM out); Y: 1.0 Vp-p 75 Sync Negative
Control Panel
D-sub 15-pin
Digital Audio Input
(CH1/2 3/4), BNC x 2, AES/EBU
Digital Audio Output
(CH1/2 3/4), BNC x 4, AES/EBU
HD-SDI Input
BNC x 1 (SMPTE 292M); Serial Digital (1.485 Gb/s)
HD-SDI Output
BNC x 3 (SMPTE 292M including one character out); Serial Digital (1.485 Gb/s)
HD/SD Reference Video Input 1
BNC x 2 (with a loop-through), Tri-level sync, 0.6 Vp-p 75? Sync Negative
HD/SD Reference Video Input 2
BNC x 2 (with a loop-through); Tri-level sync; 0.6 Vp-p 75 Sync Negative
Headphone Output
JM-60 Stereo phone jack (-? to -12 dBu at 8 load unbalanced)
Parallel Remote
D-sub 50-pin (x1)
Remote 1 Input
D-sub 9-pin (x2), Sony 9-pin remote interface
Remote 1 Input/Output
D-sub 9-pin (x2), Sony 9-pin remote interface
Remote Control
D-sub 9-pin, RS-232C interface
SDI Output
BNC x 3 (SMPTE 259M including one character out), Serial Digital (270 Mb/s)
Time Code Input
XLR-3-pin type (female) x 1, 0.5 to 18 Vp-p, 10 k? Balanced; XLR-3-pin type (female) x 1, 0.5 to 18 Vp-p, 10 k?, Balanced
Time Code Output
XLR-3-pin type (male) x 1, 2.2 Vp-p Low impedance Balanced
