The MB-8N tuner base accommodates up to four WRU-8N tuner units, and it includes a built-in antenna divider making it easy to daisy-chain up to four of these base units to form a 16-channel system. The MB-8N excels in the level of remote operation and monitoring it provides. Over standard Ethernet connections, a complete system can be set up and controlled from a PC running the supplied GUI software. This includes the store and recall of different channel configurations, a feature that is particularly useful for location use and equipment rental organizations. This WL-800 Series tuner base operates in UHF-TV channels 62 through 69, and it can be used in conjuction with WRU-8N62/64 and WRU-8N66/68 modular tuners. Please note: WL-800 Series channel 30/32 and 42/44 systems require use of the alternative MB-8N/9F tuner base.

Ideal for multi channel wireless operation
Supplied PC control software allows remote control of up to 49 wireless tuners
MB-8N front panel LCD display and menu operation allow access to all operational settings for stand alone operation
MB-8N wireless mic tuner base supports installation of up to four WRU-8N wireless mic receiver modules
Up to 16-channel simultaneous operation is possible using four MB-8N's (fitted with 16 tuner modules) without an external antenna divider
Up to 42-channel simultaneous operation is possible using an optional WD-880A antenna divider
This MB-8N tuner base operates in UHF-TV channels 62 through 69, so it can be fitted with WRU-8N62/64 or WRU-8N66/68 modular tuners
WL-800 Series channel 30/32 and 42/44 systems require use of the alternative MB-8N/9F tuner base.

System dynamic range 116 dB (typical)
Frequency response 40 Hz to 20 kHz
Distortion 1.0 % or less
Audio output level -20 dBm (LINE)/-58 dBm (MIC) at reference deviation
Audio output connector XLR-3-32 type (x 4) balanced
Sub-audio output connector D-sub 15-pin female, unbalanced
Antenna attenuator level 0 dB, 5 dB, or 15 dB
Antenna connector Inputs: BNC-R type (x 2), 50 ohm (nominal) Outputs: (for cascade connection): BNC-R type (x 2), 50 ohm(nominal)
Monitor output connector 6.3 mm dia. stereo mini jack (x 1)
Monitor output level 12 mW
Network connector RJ-45 (x 1) 10BASE-T
Power requirements AC 100 to 240 V, 50/60 Hz DC 10 to 24 V
Power available for connected AN-820A antennas 9 V, max. 100 mA
Power consumption 50 W when accommodating four WRU-8N tuner units
Dimensions (W x H x D) 482 x 44 x 300 mm ( 19 x 1 3/4 x 11 7/8 inches)
Mass 3.7 kg (8 lb 6 oz)